Graphics Display Device Driver for OS/2 Warp

마루 0 6,887 2021.11.23 00:33



    Graphics Display Device Driver for OS/2 Warp


    Systems Supported:  IBM Personal Computer systems that use the

                        Cirrus Logic 5436/46 chip set


    Driver Version: 1.12




    IMPORTANT:


    o  This package contains an OS/2 Warp graphics-accelerator device

       driver that supports the 5436/46 chip set from Cirrus Logic.


    o  Read this entire document before beginning the device driver

       installation.


    o  The device driver installation diskette must contain a

       diskette volume label of "CIRRUS 1" (without the quotation

       marks).


    o  This device driver is enabled for the Configuration

       Installation Distribution (CID) method.


    o  This README file is formatted for viewing on your screen.

       With it you can:

       -   Use the Table of Contents to help locate specific topics.

       -   Use the Find option in the Edit menu of the OS/2 System

           Editor to help you locate specific information.

       -   Print the file.


    o  Your use of the enclosed device driver indicates your

       acceptance of the following terms and conditions:

       -   You must be, and you agree that you are, a prior licensee

           of OS/2.

       -   You may make copies of the OS/2 device driver for the

           Cirrus Logic 5436/46 equal to the number of licensed copies

           of OS/2 you possess.

       -   All other terms and conditions of your OS/2 license

           agreement apply to this OS/2 device driver for the Cirrus

           Logic 5436/46; however, this does not extend any warranty

           outlined in such agreement.



    CONTENTS

    ________


           1.0  Supported Features

             1.1 Supported Resolutions

             1.2 Supported Adapters

             1.3 Supported Columns and Rows

             1.4 DDC Monitor Support

             1.5 Selecting Large or Small Fonts for Windows

             1.6 New Functions Provided with This Device Driver

           2.0  Compatibility

           3.0  Preliminary Steps

           4.0  Setting Your Monitor to VGA Mode

           5.0  Installation from Diskette

           6.0  Running in Unattended Mode

           7.0  Limitations

           8.0  Trademarks


    1.0 SUPPORTED FEATURES

    ______________________


     The Cirrus Logic 5436/46 device driver provides a seamless support

     for accelerated video graphics and advanced color resolutions

     to when used with the minimum required video memory.  It conforms

     the OS/2 32-bit flat memory model and is designed to function as

     a 32-bit Presentation Manager graphics display driver under the

     OS/2 32-bit graphics engine.



     1.1 SUPPORTED RESOLUTIONS


     This graphics-accelerator device driver supports these

     resolutions and color depths:


                             Number of    Video Memory

           Resolutions        Colors        Required


             640x480           256             1 MB

             800x600           256             1 MB

            1024x768           256             1 MB

            1280x1024          256             2 MB


             640x480         65,536            1 MB

             800x600         65,536            1 MB

            1024x768         65,536            2 MB


             640x480       16,777,216          2 MB




     1.2 SUPPORTED ADAPTERS


     Other IBM systems and video adapters that contain the Cirrus

     Logic 5436/46 chip set might be added to these lists over time.


     For a comprehensive listing of all major manufacturing products

     that are OS/2 compatible, refer to the "OS/2 Hardware

     Compatibility List" book.  This book is available electronically

     on the following bulletin board systems:


     IBM National Support Center BBS (data connection: 919-517-0001)

     CompuServe (IBM OS/2 Support Forum \Library\IBMFiles\

                 PCMTABLE.ZIP)

     Prodigy

     LAN Server & OS/2 BBS - Sydney, Australia

     IBM Austria BBS - Vienna, Austria

     IBM BBS - Vancouver, BC, Canada

     IBM PS BBS - Hong Kong

     IBM OS/2 BBS & IBM AP OS/2 BBS - Singapore

     IBM BBS - Belgium

     IBM BBS - England

     IBM BBS - Spain

     OS2BBS  - Denmark

     Hitline BBS- Switzerland

     DAP & PSP BBS - Italy

     IBM BBS - Jakarta, Indonesia

     IBM BBS - Thailand


    NOTE: The compatibility hardware test information supplied is

    provided for information purposes.  IBM makes no warranty,

    express or implied, with respect to the operation of OS/2 on

    the personal computers listed.



    1.3 SUPPORTED COLUMNS AND ROWS


    The number of characters per line (columns) and number of lines

    (rows) for an OS/2 full screen can be specified with the OS/2

    MODE command.  Supported options for this driver are:


            Columns   Rows

             40        25

             80        40


    Note:  132 column support is not available.



    1.4 DDC MONITOR SUPPORT


    DDC monitor detection is not supported in the current release of the

    OS/2 drivers. 


    

    1.5 SELECTING LARGE OR SMALL FONTS FOR WINDOWS


    The selection utility is available for OS/2 Warp 3.0 only.


    

    1.6 NEW FUNCTIONS PROVIDED WITH THIS DRIVER


    Change Refresh Rate on the Fly is available for OS/2 Warp 3.0

    only.  The new utility, located in the Systems Settings, allows the 

    user to change the vertical refresh rate "on the fly", that is, without 

    resetting the operating system or rebooting the system.


    The following procedure will allow you to change the refresh rate for

    your monitor without rebooting the system:


    1.  Double click on the OS/2 System icon

    2.  Double click on the System Setup icon

    3.  Double click on the System icon

    4.  Check to see if the monitor attached to your system is selected

        in the Monitor Box

    5.  Click on down button of the Refresh box and select a refresh rate

        (this refresh rate must be supported by your monitor)

    6.  Click the Test button.  The display will blank momentarily and

        return with a message box

    7.  Click on the YES button in the message box if your screen appears

        OK.  If your display is not readable, press the ESC key to return to

        the original refresh rate setting.


   2.0 COMPATIBILITY

   ________________


    This graphics accelerator driver is compatible with OS/2 Warp.


   3.0 PRELIMINARY STEPS

   _____________________


    The following steps prepare your computer for the installation

    of a new OS/2 graphics device driver:


    1.  You must have OS/2 DOS Support installed in order to install

        this driver.

    2.  If you previously installed SVGA, or any Cirrus Logic Driver,

        you must return to VGA mode before installing any subsequent

        driver.  Please use the procedures in the following section.


   4.0 SETTING YOUR MONITOR TO VGA MODE

   ____________________________________


    Use the following procedures to return to VGA mode.


    o   If you are installing this device driver on OS/2 Warp

        and you do not have a usable OS/2 Desktop, use

        the following procedures to return to VGA mode.

        However, if you have a usable Desktop, it is

        recommended that you use Selective Install to set

        your monitor to VGA mode.


        1.  Turn on your computer.  If your computer is

            already on, press Ctrl+Alt+Del to restart it.

        2.  When a small white box appears in the upper-left

            corner of your screen, press Alt+F1. If you see

            the OS/2 Logo displayed, you must start again at

            step 1.

        3.  When the Recovery Choices screen appears, press V.


        Your video adapter is now restored and can work in

        VGA mode.  If you want to install a new video

        adapter or video device driver, refer to Chapter

        16, "Video Procedures," in the User's Guide to

        OS/2 Warp.




   5.0 INSTALLATION OF DISPLAY DRIVER FROM DISKETTE

   ________________________________________________


     

     To install the Cirrus Logic Device driver from diskette,

     do the following:


     1.  Insert the Cirrus Logic diskette into drive A:

     2.  Double click "OS/2 System" Folder.

     3.  Double click on the Drives icon.

     4.  Double click on Drive A:

     5.  Double click on Install.exe.

     6.  Choose "Install" from the Cirrus Logic Install Program.

     7.  Click OK to let Install identify your graphics hardware and

         memory configuration.

     8.  Select "Yes" to change your display driver settings.

     9.  Select a screen resolution and close System Settings dialog

         box.

    10.  Close down Drive A - Icon View, Drives - Icon View and System

         Setup Icon View.

    11.  Remove the diskette from Drive A:

    12.  Shut down and reboot the system.


    Note:  If video memory size is changed in a system, the

           user must re-install Cirrus drivers (by re-installing

           VGA drivers first, then the Cirrus drivers).  Refer

           to Section 3.0 above.





   6.0 RUNNING IN UNATTENDED MODE

   ______________________________


   Install as follows:


       At the command prompt, type:


       A:] install /r:<path>install.rsp 

           where <path> == floppy or hard drive containing installation 

           media


   The INSTALL.RSP file contains a list of default responses to installation

   options.  These options are the location of drive containing the media, or

   use of an optional log file (for logging the unattended installation).



   7.0 LIMITATIONS

   _______________


   o   The Refresh Rate Change on the Fly Utility does not detect DDC

       monitors



   8.0 TRADEMARKS

   _______________


   The following terms are trademarks of the IBM Corporation in the

   United States and/or other countries:


      IBM

      OS/2

      OS/2 Warp


   The following terms are trademarks of other companies:


   TRADEMARK                OWNER


   Cirrus Logic             Cirrus Logic, Inc.



   IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR

   IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED

   WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND

   MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN

   THIS DOCUMENT.  BY FURNISHING THIS DOCUMENT, IBM

   GRANTS NO LICENSES TO ANY RELATED PATENTS OR

   COPYRIGHTS.

   THIS DRIVER IS COPYRIGHTED BY INTERNATIONAL BUSINESS

   MACHINES CORPORATION.  ALL APPROPRIATE RESTRICTIONS

   APPLY.



Comments

Category
State
  • 현재 접속자 235 명
  • 오늘 방문자 549 명
  • 어제 방문자 1,567 명
  • 최대 방문자 11,402 명
  • 전체 방문자 2,448,930 명
  • 전체 게시물 3,052 개
  • 전체 댓글수 4,592 개
  • 전체 회원수 104 명

- 쇼핑몰 : Softbox
- 예전 문서 / Old docs
- FTP Server: http://ftp.hanmesoft.com
Facebook Twitter GooglePlus KakaoStory NaverBand